Home Contact Disclaimer Sitemap

Card Hackers


Card Hackers JavaCard has had an effect on the smart card industry? So developing applications for smart cards was difficult? How is JavaCard going to improve this? Is there any danger that JavaCard is a passing fad? How do they work Very simply, a smart card that has a processor is inserted into a smart card reader (commonly called a card terminal) and is available for use. The software wishing to communicate with the reader needs to send some commands to manage the reader, things like power up and transfer command to card. The commands sent to cards can be custom, but we prefer to use the standard ISO 7816 specifications, which define command formats in great detail. Many different types of readers exist DirecTV you can insert this device then call DirecTV and cancel your service and you will still get all your TV channels mikobu iii cleans PPV purchase off Sub Activation card, even if the card is locked. As of , the SHADOW is the only board that is not affected by any hashing and the only board that still enables Tier Wipe Blocking 3.0 Preparing Your HU (P3) Card 3.1 Subscription cards 3.2 Make a Backup of your HU Card Required Loader Mikobu iii loads all difficult to write to cards Mikobu III fixes most 4th byte problems. 3.3 Clean your HU Card Required Loader 3.2 Make a Backup of your HU Card Required Loader It is highly advised that you make a backup of the image on your HU Card. This is not required to use the Avenger SE, but is a precautionary step. This step is usually only of use to Subscription card holders. Card which do not have a subscription do not hold any important information that would be wiped by cleaning the card. In order to perform these operations you require Extreme HU 3.x. This is a FREE program that allows you to clean code from your card. A search in your favourite search engine should give you many download links, and instructions on installation. 1) Connect your Unlooper/Loader to the Com port of your PC and insert your HU card directly into the card slot. 2) Double click on the Extreme HU icon and you will be brought to this main welcome screen. In the bottom left corner written in green you should see "Com1: Ready" and "Device: Detected". If you can see this you are ready to proceed. Otherwise: - Select the 'File Menu' and click 'Settings Select the Com port your Unlooper/Loader is connected to under the Loading Settings Click Save and Exit JavaSoft will soon be releasing an API that supports Serial and Parallel devices. Once this is available, OpenCard can be 100% pure. But we are diverging. OpenCard is a fairly lightweight interface to smart cards that provides a framework for developing smart card applications in Java. PC/SC is an interface to smart cards for Windows platforms. OpenCard, in the spirit of cooperation, has provided an interface layer so that OpenCard can use PC/SC to basically manage smart card readers or terminals and send APDUs [application protocol data units] to these readers. So if you write your application to the OpenCard specification you will get portability if you write it to PC/SC you will only work on Windows platforms, which may not be the predominant personal platform. 3) Select the 'Card Menu' and click 'Read Card'. You will see it begin to attempt reading the card. This should take no more than 30 attempts. Once complete you will see the code on your card in the Message Window. Backup of your HU card is now complete 3.3 Clean your HU Card Required Loader because the access card is married to the first receiver is was activated inside. (aka USW) A change in the code on the access card, usually done to destroy cards with hacks on them, or to add some fuctionality (such as interactive TV) to the access card. USW stands for Update Status Word, and Card Hackers

Home Card DSS Card DSS DSS Smart Smart Smart Card