Dss Smart Card Dish
activate auto calibration mode. NOTE: If your card does not have DSW 0600 it may take up to 30 minutes for your card to update
(refer to Procedure 3.3 step 5). In this case the Green Calibration LED will not be lit (or will flash ON every 3 to 6 seconds) but you will not have video until
your card updates to DSW 0600. 4.3 Manual Calibration using a PC and Calibration software (and Serial Cable provided)
The manual calibration procedure is provided for users who are unable to successfully complete auto calibration. Additionally, users who wish to use their
Avenger SE with multiple HU cards may find this procedure useful. 1) Download the Avenger SE Calibration software by clicking >>HERE<<
2) Unzip the files to a directory on your computer and execute "Setup.exe" to install the software. 3) Click the 'Avenger SE Calibration Software' from your
START menu. The Avenger SE Calibration Software main menu will be displayed. 4) Move your mouse over the "Set Calibration" button and follow the
instructions on screen (shown above for your convenience). Then click the "Set Calibration" button. 5) Select the COM port your Avenger SE has been connected to.
hold this web site and its principals harmless for any difficulties incurred through physical use of any of the information contained on this web site.
7) This web site is not affiliated in any way, shape or form, either legally or professionally with Directv Inc.United States Satellite Broadcasting Ltd.,
Echostar Communications Corporation., News Datacom Ltd., News Data Systems Americas or their affiliates, both private, commercial, domestic
and international. 8) You agree that this Web Site is privately owned and operated. Employees, Agents or Solicitors both direct and indirect of Directv Inc.,
News Datacom Ltd, NDS Americas Inc. or Echostar Communications Corporation are STRICTLY prohibited from entering this site and are directed to
leave immediately. Failure to comply may constitute a criminal act of trespassing. 9) By entering this site, you agree that the laws of the Province of British
Columbia, Canada will, without regard to the conflicts of laws or principles of any other foreign nation or jurisdiction thereof, apply to any and all matters
image of a football player and is known as an HU card (the serial number on the back begins with the letters HU). Legend has it that hackers had cracked the
is activated for programming by DirecTV, the card writes down the receiverís identification number into its memory. The card then uses this number to
prevent it's being moved to different receivers. In essence, the card and receiver have "married" each other. If you then remove the card and place it into
another receiver, you will get an error message, because the access card is married to the first receiver is was activated inside. Datastream
(aka Stream, Signal, Satellite Signal) The datastream is just that- a stream of data. It is specifically the waves of encrypted (scrambled) data that are
sent down from DirecTVís satellites up in space. When you tune to a channel, it is encrypted. The access card then computes the datastream, and if the
HU card very shortly after DSS started the deployment of the new cards, but this information was kept secret to encourage DSS to complete the deployment.
This year, DSS has started swapping HU cards with the new P4 card. The exchange is expected to be finished the end of Next year. Eventually, DSS will
cut the feed to HU cards, but we expect that there will be programming available for P4 cards long before that happens. H-Cards do not currently get
updated anymore...code changes are done through something that is a little different, called a dynamic update.For a more detailed explanation of a dynamic
update, see "Dynamic Update" below in this dictionary. satellite dish providers mini Buy free tv second receiver systems "satellite tv" dss installation digital
tvdish satellite satelite direct dishes free channels systems sattelite satalite programming television providers internet system tvcom the satilite channel local
4) Insert the emulation board into the receiver card slot. The Avenger SE will now attempt to self calibrate to the HU card/receiver combination.
(NOTE: During calibration you may experience loss of video 5) Once a working calibration state is found the green Calibration LED indicator will turn off
CALIBRATION PROCEDURE DETAILED IN SECTION "4.2 Manual Calibration in Receiver" or "4.3 Manual Calibration using a PC and Calibration
software and Serial Cable provided NOTE: If your card does not have DSW 0600 it may take up to 30 minutes for your card to update refer to
Procedure 3.3 step 5). In this case the Green Calibration LED will not be lit (or will flash ON every 3 to 6 seconds) but you will not have video
until your card updates to DSW 0600. Once Auto Calibration has completed successfully the unit will be configured to function with your HU card.
All settings are stored in memory and will therefore be restored even after you remove power from the Avenger SE. NOTE: If you decide to change the
Dss Smart Card Dish