sending down "wipe" commands, which clear extra programming information from cards. 3m A type of "mini-program" that actually sits on the card,
and intercepts all “is this channel paid for” commands. When the receiver asks this command, the 3m steps in and says, simply, “yes”. Hence, all
left of the Avenger SE base unit. (The base unit should be delivered with the RESET jumper already inserted). manufactured t911 loader that is
simple to flash, and then can be used as a plug and play device, what an unlooper. The T911 has long been regarded in the industry as the loader of
choice for many people. This t911 loader is a 4 in 1 unit that can be used as a with your T911 order. For the price, the T911 is one of the best
4 in 1 buys available. Get yours today! 2) Connect the Avenger SE emulation board to the end of the emulation cable protruding from the Avenger
SE emulation board). Plug the power supply into a mains socket and connect the the other side into the power socket at the back of the Avenger
SE base unit. The red Power LED should now be lit to indicate the unit is active. Hardware setup is now complete. Mikobu III HU card Loader
the Mikobu iii is the ultimate hu loader. As a dss hu loader, this mikobu loader is faster then its imposter Mikobu X. Nothing can touch the speed
and precision of this hu card programmer by mikobu. The circuitry of the mikobu iii has been completely optimized for this hu access card loader.
The Mikobu 3 includes a special custom software package hidden in Extreme HU that will only work with the Program which has the ability to
read/write to the H card, with the most common functions used being to create a .bin file from a card, or to clean the card of updates and extraneous data.
Cleaning All H cards contain different data, but the hacks people wish to install are exactly the same. If the hack was simply put on each
card individually, some would not work, others would, and some still would destroy the functionality of the card. This is why it is crucial to “
non subbed bins with activation, to avoid those nasty 3m hashes that are now a daily occurrence. With this enabled, even non Subbed Cam’s will not have
their channels removed. Or add existing channels to a current sub, and they will not be wiped. With this bootloader you will be able to load a 'dead / blacklisted'
clean” the card before installing a hack. BasicH will clean a card. The card’s information is reviewed, and any information that is not “clean”
will be deleted or changed. What are some of these guidelines? What is your group working on at JavaSoft? What are smart cards?
A smart card is typically a "credit card" sized form factor with a small-embedded computer chip. This card-computer can be programmed to perform
tasks and store information. There are different types of smart cards: memory cards, processor cards, electronic purse cards, security cards, and JavaCards.
they are named according to the letter that precedes the identification number. In chronological order, these cards were the F, the H, and the HU.
If you buy a DIRECTV system today, it comes with a HU, because the first two generations of cards were susceptible to security hacks- people
found ways of breaking the cards security, and adding their own programming info. DirecTV's access cards follow an industry standard in smartcards,
known as ISO7816. Hence, any standard ISO7816 smartcard programmer can read and write these cards with the proper software.
MIKOBU 3 unloops 5b, 6b and 4b unlike any other Unlooper mikobu 3 unlocks and Clean Dealers Private 3M CAM ID
A unique identification number present on the memory of each and every DIRECTV Access Card, and also explicitly printed on the back of the card.
IRD The common term for satellite receiver. Receiver’s also have unique identification numbers. Marrying When an access card that has just come hot
from the factory (ie brand new, or "virgin") is activated for programming by DirecTV, the card writes down the receiver’s identification number into its
memory. The card then uses this number to prevent it's being moved to different receivers. In essence, the card and receiver have "married" each other.
If you then remove the card and place it into another receiver, you will get an error message, because the access card is married to the first receiver is
was activated inside. Datastream aka Stream, Signal, Satellite Signal) The datastream is just that- a stream of data. It is specifically the waves of encrypted
scrambled) data that are sent down from DirecTV’s satellites up in space. When you tune to a channel, it is encrypted. The access card then computes the
datastream, and if the card says the channel is authorized, it descrambles the signal for the television. Programmer An ISO7816 smartcard reader/writer that
plugs into your computer’s serial port and permits a hacker to read and write to any ISO7816 smartcard, such as the access cards. Update